Kubota Brabender Technologie GmbH
展位号: HALL 10 - G27
kubota-bt.com
关于我们
布拉本达技术公司是全球领先的称重和体积式喂料器和辅助下料设备制造商。我们的计量、称重和辅助下料设备安装在全球范围内，适用于不同行业的批次和持续工艺。
地址
Kulturstr. 49
47055 Duisburg
Germany
电子邮件: jsalje@kubota-bt.com
电话: +49 203 99840
网址: kubota-bt.com
联系人:
Jennifer Salje
电子邮件: jsalje@kubota-bt.com
电话: +49 203 99840
展示产品
我们的产品范围广泛，包括失重式和体积式喂料器。我们为固态物料的计量，提供多样的、可靠的、高精度的解决方案。除此之外，我们还提供基于体积式喂料器的增重式批量计量系统和基于失重式喂料称的失重批量计量系统。
喂料器
我们的可靠和精确的失重式喂料器是各种固态物料计量方案的理想选择。我们生产失重式皮带秤、失重式和体积式喂料器，具有多样化的、种类齐全的喂料装置和搅拌系统，例如，FlexWall技术、单螺杆和双螺杆搅拌破桥喂料器、振动槽、纤维喂料器、极低产能颗粒喂料器，等等。我们还提供易于清洁的解决方案，以便快速更换物料。我们所有的失重式喂料器，都配有最先进的基于微处理器的控制系统，操作界面简单易用。
FlexWall®Plus
The FlexWall®Plus FW80/1 feeder is ideal for free flowing bulk ingredients. The feeder has the following main components: a stainless steel trapezoidal housing, flexible polyurethane trough with a large trough cross-section, a feed screw, a screw tube, 3 phase motor and a trapezoidal extension hopper.
NXT26
TWIN SCREW FEEDER NXT45M
Handles poor-flowing, sticky powders as well as fibers and pellets.
It has a special negative angle wall hopper geometry and an diagonal agitator that prevents bridging and ensures optimal bulk material flow into the screw and a uniform screw fill level.
Single Screw Feeder DSR28
The DSR28 is a feeder ideal for poor or difficult flowing bulk ingredients at low feed rates. The feeder has the following main components: a stainless steel screw trough, an agitator in the screw trough, a screw, a screw tube, a 3 phase AC motor and extension hopper with volumes of 5 dm³ (0.18 cuft), 10 dm³ (0.35 cuft) or 20 dm³ (0.71 cuft).
